STANDARDKit Includes 144 pieces
Side Moulding Mount T Bolts
5/32 x 3/8" Flat Washer SAE
6-32 Zinc Plated Hex Nut
6 x 3/8" Zinc Plated Pan Slot SMS A
Side Chrome Mount Flat Retainer
These t-bolts are assembled into the side mouldings by sliding them into place from the end of the molding. The S shaped retainers (3 per side) are used to secure the bottom moulding on the front fender in the 2 rear most positions, and the top moulding at the 1 rear most position. The clip is screwed onto the panel from the outside and the moulding is snapped onto the clip. The clip is used in these positions because there is no way to get to the back of the panel to install a washer and nut like the rest of the fasteners use.
| Make | Model | Years |
| Chevrolet | Corvette | 1956 - 1961 |
| Net Weight | 0.3 |
