Reproduction Camaro Battery Tray Fits As Original Heavy Gauge Stamped Steel Correct Size Welded Nuts Black EDP Coated To Ensure Rust Prevention Fits 1970-1981 2nd Gen Camaros The battery tray in your 1970-1981 second generation Camaro is…

Correct Battery Hold Down Clamp Replaces Original Correct Cad Coating Heavy Gauge Stamp Steel Construction battery hold-down clamps are a must for any restoration, daily driver or hot rod Camaro. This Camaro battery clamp holds your…

Replacement Bolt Correct Style Bolt Except For Head Marking Secures Hold-Down Clamp Battery hold-down clamps are a must for restoration on your 1967-1981 Camaro. This Camaro battery clamp holds your battery in place safely and securely to…

…

Battery hold down bracket, includes 1498 bolt. 1967 w/o A/C  1968-82 All …

  Reproduction Of Original Includes:1 Bracket2 Plates1 Reinforcement1 Bolt5 Rivets   …

Reproduction Of Original Set Of 4 Bolts Mounts Battery Tray To Core Support And Front Fender Well When replacing your battery tray on your 1970-1981 Camaro, it is a good idea to get a new battery tray bolt set of four bolts to mount your…

  Stock Replacement Used On Ignition Shields   …

Fully Automatic - Will keep your battery fully charged without over charging.  The on-board microprocessor turns the charger on and off based on your battery's demands. It does so automatically, every few milliseconds. Designed…

…

…

ACDelco has a "totally correct" spark plug for your Corvette's engine. Sure, others work, but none will perfectly complement the ignition system. ACDelco spark plugs are designed to achieve the optimum in engine performance when used in…

Replacement Battery Tray Clamp Stainless Steel EDP Coated To Ensure Rust Free Delivery Camaro battery hold-down clamps are a must for any restoration, daily driver or hot rod Camaro. This Camaro battery clamp holds your battery in place…

Converts Dated Ignition Systems To Modern HEI Technology Easy To Install Improves Engine Performance May be Supplied With Red Or Black Cap (No Choice) Distributor May Not Clear High Rise Or After Market Manifolds Now with a…

For 1960-74 Corvettes with severe tachometer cable binding, when replacing a broken cable or to prevent future problems, install our 90 Tachometer/Speedometer Cable Adapter. It allows you to run the cable straight into the adapter…

…

…

ACCEL's SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven…

Reproduction Of Original  …

  Reproductions Of Original Helps Stop Radio Interference 4-Piece Set   …

…

Restoration Correct Battery Hold Down Clamp Correct Black Oxide Coated Heavy Gauge Stamp Steel Construction Fits 1966-1977 Chevelle & Malibu Models Chevelle battery hold down clamps are a must for any restoration, daily driver or hot…

…

This starter heat shield is designed to guard against starter failure do to hi heat temperatures. It puts a air barrier which protects the started from exhaust manifold or header heat. Insulates Starter From Heat Prolongs Starter…

We are just looking for the battery tray that is functional and does its job of holding the battery. …

This clip keeps the positive battery cable which runs down to the starter from coming into contact with the engine or frame reducing the possibility of abrasion. These clips were installed in the engine plant on two of the oil pan bolts…

…

…

…

…

…

…

Replacement Wires Manufactured With Packard Wire, Same As Original GM Wires Correct OHMS Resistance/Foot Correct Lengths & Instructions Correct Premium Boots/Terminals Kevlar Wrapped Insulation/Superior To…

OER® Authorized reproduction of the original battery tray clamp designed for use on various 1967-81 GM models. Manufactured in steel as original and EDP coated for rust prevention. This reproduction is designed to replace the origi nal…

…

…