Mild2Wild works with all 2006 and up Z06/ZR1 Grand Sport C6 with the optional bimode exhaust (NPP)
Control your Bi-mode Z06/ZR1 or NPP with your FOOT, the Old School way. Just like the old hi-beam switch. No hands needed!
Installs in minutes. Simply remove the OEM dead pedal (very easy, 2 nuts) drill a 1/2" hole and install. The special flat wire harness passes from the driver side to the passenger side. Plug the adapter into the fuse block. No ground wire to install.
Zero drain, starts in the last selected setting. No fob, no wireless, no visor. A special heavy duty switch is in easy reach: press loud, press quiet, how simple! You can even switch it prior to starting the car.
The kit includes a pre-wired heavy duty switch, stress relief block, and zip tie, special flat shielded cable, fuse taps and fuses, and special exhaust fuse bypass spade. 10 minute install. Tools needed: 10mm wrench, 1/2" drill bit.
MILD WILD
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
Corvette |
2006 - 2013 |
