PCV Corvette Valve Cover Grommets are used as a seal between the valve cover and a breather or PCV. You will need the grommet when using any valve cover with a breather or PCV.
Specifications:
Quantity: 1 piece
Outer…
Ultra-Seal material provides a positive seal through controlled swelling of the gasket once exposed to hot engine oil.
The polymers used in Ultra-20 also insure gaskets will not harden and fall apart like others can. Gaskets are coated…
Specifications:
Attachment Method: Push on
Inside Diameter: 0.72 inch
Material: Rubber
Outside Diameter: 1.36 inch
Thickness: 0.65 inch
Fits 69-77 W/Alum Valve Covers, 78-80 L82, and 81-82 All
…
Baffled
Yes
Breathers Included
No
Gaskets Included
No
Grommets Included
No
Valve Cover Hole Style
One cover has a single 1.25" breather hole. The other cover…
Rubber breather/PCV grommet is used as a seal between the valve cover and a breather or PCV. You will need the grommet when using any valve cover with a breather or PCV. Fits valve covers with a 1-1/4" diameter push-in hole. Qty: 1 piece…
Stock Replacement
1" Diameter
Fits 1965-69 427ci With 3 x 2 Left Valve Cover
Fits 1965-74 All Big Block Right Valve Cover
Cut Bottom When Used For Vent Elbow
…
These short design Big block valve covers are an OE-style design, including baffles and dripper rails, and a recessed corner that clears the power brake booster.
All 66-74 427/454 Corvette Original Valve Covers came with power brake…
Show Quality Reproduction
1/4-20 x 1" Zinc Plated Steel Bolts
Correct "M" Headmark
8-Piece Set Without Washers As Original
Fits 1964-1986 Early Small Block Chevy With Factory Aluminum Valve Covers
…
Triple Chrome Plated Bolts & Washers
Fits Cars With Aluminum Valve Covers
Sold As A Complete Set
NOTE: Not Originally Correct (Original Bolts Were NOT Chrome & Had Head Markings)
…
Reproductions Of Original For Big Block Engines Your valve cover grommets are designed to control oil leakage and air flow into your 1965, 1966, 1967, 1968, 1969, or 1970 Chevelle?s breather cap. They also keep oil from getting all over…
Reproduction Of Original All Small Block 1967-1969 Finned Aluminium 1969 Your valve cover grommet is designed to control oil leakage into your 1967, 1968, or 1969 Camaro?s breather cap. They also keep oil from getting all over your valve…
Pontiac short chrome steel valve covers fit 1959-1981 Pontiac 301-326-350-389-400-421-428-455 V8 engines. There is one breather hole in each cover. Height…
Replacement Valve Cover Retain Set This Camaro replacement chrome valve retainer bolt set has been manufactured to meet or exceed factory specifications and performance. You will find the fit; finish and function will work perfectly for…
Premium Street Performance Chrome hold-down clamps with distinctive look and boldly striking Bowtie Emblems, inlaid with classic Chevrolet red. By spreading the load over a wider area, this clamp minimizes distortion of the valve cover…
Originally, Camaros did not use Big Block valve covers with the booster dent. These were found on Chevelles and El Caminos. But, some Camaro applications can get pretty close with upgraded braking systems and these booster dent valve…