Rag joints provide a small amount of flex for a steering shaft within a few degrees of the same plane as the steering gear input shaft. It also provides some damping of vibration coming from the steering system, providing some isolation…
This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with flat at bolt head side
Spline Count: 25
Total OD: 3-1/4"
Bolt Size: 5/16"
Bolt…
Reproduction Of Original (3) Hardened Hex Head Bolts (3) Hardened Beveled Washers Attaches Steering Box To Subframe Works With Delphi Fast Ratio Steering Boxes This steering box bolt set attaches the steering box to the front subframe of…
Reproduction Of Original (3) Hardened Hex Head Bolts (3) Hardened Beveled Washers Attaches Steering Box To Subframe Works With Delphi Fast Ratio Steering Boxes This steering box bolt set attaches the steering box to the front subframe of…
Kit includes 3- 4 1/2" long black carrige head bols with ABN headmark. Alos included are 3 nuts and lockwashersC2 C3 CORVETTE GEAR BOXES MOUNTING BOLTS…
Buy The Kit And Save Money ! $ ! The Kit Includes: High Pressure Hose, Low Pressure Return Hose And Clamps Correct Fittings And Line Bends Correct GM Style Rubber Hose Fits All V8 Engines 1967-1968 Camaro power steering systems take…
This 600 Weight Oil Is Necessary For Many Early Fords
It Is Nearly Impossible To Find Locally
It Saw Use In Differentials, Transmissions, And Steering Boxes
Will Not Attack Brass Or Bronze Parts
One Quart
The…
The C2 and C3 Corvette's are known to have flexing issue at the steering box when running a wider tire on the front. This was an issue that has needed to be addressed for years. During the 48 Hour Corvette build, we built a prototype…
Buy The Kit And Save Money ! $ !
The Kit Includes: High Pressure Hose, Low Pressure Return Hose And Clamps
Correct Fittings And Line Bends
Correct GM Style Rubber Hose
Fits All V8 Engines
Fits Small Block And Big Block…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
Technically correct component and finish. Original GM for quality and safety. Used on all steering couplers. (Note: Tilt columns only use an additional bolt to fasten coupler flange to column).
…
Restoration Correct
Correct Fit
Fits Inline 4, Inline 6, V6 And V8 Engines
Also Fits IROC-Z 1989-1990, Rally Sport 1992, Z28 1967-1992
Is the steering gear on your 1967-1992 Camaro leaking fluid at the pitman shaft seal?…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
Comes as a complete unit and ready-to-install. This includes both pieces of the coupler, the rag joint to go between them and all the necessary hardware. 36-spline.Power Steering Box Coupler Without Tilt, 13/16".…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
Reproduction of Original This steering column coupler commonly known as the rag joint can be a weak link between the steering column and the steering gear box. When the coupler becomes worn, it can lead to future problems with your…
Restoration Correct Correct Fit Fits Inline 6 And V8 Engines For Gear With Ring Retaining Housing In many cases when the gear assembly is leaking on your 1965-1977 Chevelle or Malibu it's not a failed gear assembly, but a simply a leaking…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
(2) Special Shouldered Bolts (2) Coupler Repair Bolts (1) Steering Coupler Repair Bushing The El Camino Store has an inexpensive solution to a broken or worn steering coupler or rag joint. This steering coupler repair kit replaces all the…
Reproduction Of Original This Camaro reproduction steering box tag has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the quality and appearence will work superbly for your…
Restoration Correct
Correct Fit
Fits Inline 4, Inline 6, V6 And V8 Engines
Also Fits IROC-Z 1989-1990, Rally Sport 1992, Z28 1967-1992
Is the steering gear on your 1967-1992 Camaro leaking fluid at the pitman shaft seal?…
(2) Special Shouldered Bolts (2) Coupler Repair Bolts (1) Steering Coupler Repair Bushing This steering coupler repair kit replaces all the hardware and the steering bushing to give your Chevy or GMC Truck a like new steering coupler. …