Front left fender extension for 1967-1968 Chevrolet Camaro and 1967 Pontiac Firebird that restores proper wheelwell fitment and front-end alignment. This reproduction panel secures and protects the lower fender edge, prevents debris intrusion and rust, and is engineered for an accurate OEM-style fit. Durable construction and a corrosion-resistant finish provide long-term reliability while keeping installation straightforward for restoration and repair projects.
Features:
- Fits 1967-1968 Chevrolet Camaro and 1967 Pontiac Firebird — front left (driver side).
- Stamped steel construction with a corrosion-resistant coating for durability.
- Restores proper fender alignment and secures the lower wheelwell and trim.
- Prevents water, dirt and debris intrusion that can cause corrosion and damage.
- Designed for direct replacement in restoration or repair applications, easing fitment.
- Straightforward fit reduces alignment time and helps achieve a factory appearance.
Installation / Application:
- Difficulty: 3/5
- Estimated time: 2-4 hours
Instructions:
- Prepare vehicle: park on level surface, disconnect battery, lift and support vehicle, and remove front left wheel and inner splash shield for access.
- Remove old extension: locate and drill out spot welds or remove fasteners securing the existing extension; carefully separate the old panel from the fender.
- Clean and prep mating surfaces: grind remaining welds and rust back to clean metal; ensure a straight, corrosion-free edge for the new panel.
- Test-fit new extension: position the replacement panel and check alignment with adjacent fender, wheel opening, and trim; make minor adjustments as needed.
- Secure panel: clamp the extension in place. Attach by spot-welding at OEM locations or use rivets/structural adhesive per your repair method and local regulations.
- Finish welds and seams: grind smooth welds, apply seam sealer to all joints, and feather edges for a smooth transition.
- Bodywork and paint: apply body filler where necessary, sand smooth, prime, and paint to match the vehicle.
- Reassemble: reinstall inner splash shield, wheel, and any removed trim; torque fasteners to spec and lower the vehicle.
- Final check: inspect fitment, paint finish, and seam sealing; take the vehicle for a short test drive and recheck fasteners and alignment.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
Camaro |
1967 - 1968 |
| Pontiac |
Firebird |
1967 |
