Front right replacement floor pan for 1970-1974 Camaro and Firebird with integrated toe board and center hump. This OEM-style stamped steel panel restores the factory contours, structural support, and mounting surfaces for carpet and interior trim. It replaces rusted or damaged floor sections to regain chassis rigidity, prevent water intrusion, and provide a proper foundation for restoration or daily-driving repairs. Durable, precision-formed construction simplifies fitting and ensures long-term reliability when welded and sealed properly.
Features:
- Fits 1970-1974 Chevrolet Camaro and Pontiac Firebird — front right (passenger side) with toe board and center hump.
- OEM-style stamped steel construction restores factory contours and mounting surfaces.
- Replaces rusted or damaged floor sections to regain structural integrity and correct fitment.
- Integrated toe board and center hump included for a complete, accurate repair.
- Designed for welding installation; provides a long-lasting foundation for carpet and interior trim.
- Helps prevent water intrusion and reduces cabin vibration when properly sealed and finished.
Installation / Application:
- Difficulty: 4/5
- Estimated time: 4-8 hours (depending on corrosion, experience, and prep work)
Instructions:
- Disconnect the battery and remove interior components (seats, carpet, trim) to expose the damaged floor area.
- Assess and mark the cut lines; drill out spot welds and cut away the rusted floor section using an angle grinder or air tools.
- Prepare mating surfaces by cleaning to bare metal; remove rust and ensure a solid flange for welding.
- Test-fit the replacement floor pan and toe board, trimming as necessary for proper alignment and gaps.
- Clamp the panel in place and begin welding using stitch welds or plug welds to replicate factory attachment points.
- Grind welds flush where desired, and inspect weld penetration and fitment; correct any high spots with hammer and dolly.
- Apply rust inhibitor or primer to all exposed metal and welds, then seam-seal joints to prevent moisture intrusion.
- Finish with undercoating or paint as required, allow proper cure time, and re-install interior components.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
Camaro |
1970 - 1974 |
| Pontiac |
Firebird |
1970 - 1974 |
