1970-1981 Camaro / Firebird 4-speed manual transmission hump panel designed to restore the factory transmission tunnel, secure the shifter opening, and protect the cabin floor. This pre-formed stamped steel panel reproduces the correct contour for 4-speed cars, providing a durable foundation for carpet and center consoles while preventing exhaust and road noise intrusion. Ideal for restorations and rust repair, it offers long-lasting strength and a straightforward fit for professional or competent DIY installs.
Features:
- Fits 1970-1981 Chevrolet Camaro and Pontiac Firebird 4-speed manual transmission models.
- Pre-formed stamped steel construction for accurate OEM-style contour and strength.
- Restores factory floor appearance and provides proper shifter opening and mounting support.
- Helps reduce road noise, heat, and exhaust intrusion into the cabin.
- Supplied with corrosion-resistant primer to protect bare metal prior to final finish.
- Designed for restoration or replacement of rusted or damaged transmission tunnel sections.
Installation / Application:
- Difficulty: 3/5
- Estimated time: 2-6 hours (depending on rust repair and skill level)
Instructions:
- Disconnect battery, remove seats, carpet, center console, and shifter assembly to expose the floor pan.
- Clean the area and assess the extent of rust or damage; mark the section to be removed using the replacement panel as a template.
- Cut out the damaged panel area, preserving as much solid flange as possible; remove spot welds where applicable.
- Test-fit the new hump panel, trimming and shaping with hammer/dolly as needed for an accurate fit.
- Clamp the panel in place and tack-weld at multiple points to maintain alignment, then complete welds in short runs to minimize distortion.
- Grind welds smooth, clean the area thoroughly, and apply seam sealer to all joints and seams.
- Prime and paint the repaired area or apply undercoating as desired for corrosion protection.
- Reinstall shifter components, center console, carpet, and seats; verify shifter alignment and function before final assembly.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
Camaro |
1970 - 1981 |
| Pontiac |
Firebird |
1970 - 1981 |
