Right hand front fender for 1982-1990 Chevrolet Camaro designed to restore panel fit, protect the engine bay and wheel well, and provide a correct mounting surface for lights and trim. Manufactured from stamped steel with factory-style mounting points, this replacement panel helps maintain proper body alignment and exterior appearance while resisting corrosion when properly primed and painted. Ideal for collision repair or full restoration projects, it offers dependable durability, straightforward installation, and an OEM-like fit to keep your Camaro looking and performing as intended.
Features:
- Fits 1982-1990 Chevrolet Camaro (right hand / passenger side) models.
- Stamped steel construction for strength and factory-style rigidity.
- Restores proper body alignment, panel gaps, and mounting points.
- Protects engine compartment and wheel well from debris and moisture.
- Supplied with factory-style mounting holes to simplify installation and hardware transfer.
- Durable replacement panel designed for collision repair and restorations; requires priming and painting.
Installation / Application:
- Difficulty: 3/5
- Estimated time: 2 hours
Instructions:
- Prepare workspace: park on level ground, disconnect the negative battery terminal, and support the vehicle safely on jack stands if removing the wheel.
- Remove adjacent components: take off the wheel (if needed), inner fender liner, bumper/trim pieces, headlight assembly, and any accessories attached to the fender to expose fasteners.
- Mark and retain hardware: label and set aside bolts, clips, and brackets. Transfer reusable mounting hardware from the old fender to the replacement as needed.
- Detach the old fender: remove all fasteners securing the fender to the cowl, door jamb, bumper, and front apron. Carefully lift the old panel free, avoiding damage to surrounding panels.
- Test fit the new fender: position the replacement panel and check gaps at the door, hood, and bumper. Use masking tape to protect adjacent paint while aligning.
- Adjust alignment: loosen mounting points slightly to shift the panel for proper gaps. Once satisfied with fit, tighten bolts progressively to factory torque values.
- Reinstall components: reinstall headlight assembly, bumper/trim, inner fender liner, and wheel. Reconnect the battery.
- Finish and protect: apply seam sealer where needed, prime and paint the panel to match the vehicle, and inspect for proper operation of lights and hood/door clearances.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
Camaro |
1982 - 1990 |
