855.444.6872 Contact Us Mon-Fri 8a-9p & Sat 10a-3p EST
DRIVEN BY CARE

Wilwood Brakes W6A Radial Mount 120-11662-RS

Wilwood Brakes W6A Radial Mount 120-11662-RS
Wilwood Brakes W6A Radial Mount 120-11662-RS
$788.99 ea
NEWARRIVING SOONEstimated Ship Date 10/26/2022 (If Ordered Today)Out of stock with WILWOOD ENGINEERING as of 09/24/2022
Model: 3924498
Supplier has not provided any fitment data for this product.
STANDARD
DELIVERY
STORE PICKUP
[More Info]

The W6A forged six piston caliper delivers heavy duty stopping power for the road or track. The caliper incorporates race technology into a body design with widespread adaptability. Radial mounting, two options for piston volume, and a redisigned rotor diameter range from 12.19" to 15.00" give this caliper the versatility necessary to suit all types of heavy weight braking requirements.

The W6A body is the product of FEA computer design and stress flow forging technology. FEA technology allows the designer to test the prototype in a computer environment to determine the optimal structural design within the dimensional parameters of the component. Stress flow forging produces a part with the internal grain structure of the metal aligned in the direction of the flow of the body contour. The results are a caliper with superior clamping efficiency and ultimate strength against fatigue, stresses, and distortion under load.

The performance of the W6A is enhanced with SRS bridge plates, snap-ring locked pad retainer pins, recessed two-piece bleed screw assemblies and dampen mounted fluid transfer tubes. SRS bridge plates eliminate all bridge wear caused by pad gouging. The spring-loaded action of the plates also eliminates pad rattle. Snap ring clips lock the pad pins in place to provide positive retention and allow easy service without caliper removal. The bleed screws are recess mounted for protection against impact and debris. The fluid tubes are dampen mounted to protect them from fatigue or damage from vibration or debris. Calipers are anodized in high luster black to protect from corrosion and maintain their high-tech appearance. The W6A is also available with a gloss red finish or other custom Wilwood color by order.

About Wilwood Engineering

Wilwood Engineering designs and manufactures high-performance disc brake systems. Since the company’s inception in 1977 by Bill Wood, we have developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Our core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.

With headquarters in Camarillo, California, Wilwood employs approximately 250 people. We have on-shelf stock of more than 300 different brake calipers, 200 rotor designs, 100 master cylinder designs and a wide assortment of brackets, fittings, valves and brake lines. Our off-shelf brake calipers range in size from tiny calipers used on go-carts and light duty industrial equipment, to heavy duty original equipment brakes for the U.S. military Humvee.

Wilwood's engineering department uses the latest computer-aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions for the most difficult braking tasks. Our extensive inventory of proprietary on-the-shelf components allow us to provide cost-effective solutions for unique brake applications.

Wilwood is ISO 9000 compliant and has extensive experience maintaining quality levels of 100ppm or less for original equipment manufacturers.

Downloads:

Download Name File Size
fl188.pdf158.76KB

Specifications:

Parts & Accessories
Bleed Screw Kit 220-6069
Cross-Over Tube 190-9875
O-Ring Kit 130-3084
Pad Retainer 180-9874
Replacement Piston 1 200-7531
Replacement Piston 2 200-7516
Replacement Piston 3 200-7516
Wear Plate L/H 300-5876
Wear Plate R/H 300-5876
Brake Pad Specifications
Brake Pad Type 1 6617
Total Pad Area (in²) 11.1
Total Pad Volume (in³) 5.2
Colors & Finish
Color Black
Finish Black Powder Coat
Pistons
Dust Boot No
Piston Area (in²) 5.40
Piston Count 6
Piston Type Stainless
Mounting Specifications
Inlet Thread Size 1/8-27 NPT
Mount Center(in) 7.09
Mount Height(in) 2.09
Mount Hole Size(in) 0.45
Mount Side Left Hand
Mount Type Radial
Duty Rating & Material
Material Aluminum
Weight(Lbs) 7.6
Rotor Compatibility
Maximum Rotor Diameter(in) 15.00
Maximum Rotor Width (in) 1.28
Minimum Rotor Diameter(in) 12.19
Minimum Rotor Width (in) 1.10
Rotor Width (in) 1.25
Mounting
Mount Center(in) 7.09
Mount Position Rear Mount
Mount Side Left Hand
Mount Type Radial
Pad Dimensions
Pad Area (in²) 11.1
Pad Volume (in³) 5.2
Piston Specifications
Piston 1 Bore (in) 1.75
Piston 2 Bore (in) 1.38
Piston 3 Bore (in) 1.38
Total Piston Area (in²) 5.40
Rotor Dimensions
Rotor Diameter(in) 15.00
Rotor Width (in) 1.25

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Wilwood Brakes W6A Radial Mount 120-11662-RS:
* Your Name:
* Email (This will not be displayed)
Question:
Muscle Cars & Classics 2022