This 4-piece beltline molding kit includes inner and outer left- and right-hand trim pieces (inner/outer) designed to restore the vehicle's beltline appearance and secure the edge where glass meets bodywork. Sold as a complete left/right set, the kit replaces worn, cracked, or missing moldings to protect the paint, reduce wind noise and water intrusion, and provide correct alignment for window run channels. Constructed from durable, corrosion-resistant materials with factory-style fit and finish, the kit offers reliable long-term performance and straightforward installation for compatible vehicles — verify fit using the part number WFK 1110 60 A.
Features:
- Replaces inner and outer beltline moldings — left and right, 4-piece kit (WFK 1110 60 A); verify fit for your vehicle
- Restores and secures the beltline where the window meets the body to reduce wind noise and prevent water intrusion
- Durable, corrosion-resistant material designed for long-lasting exterior protection and OEM-style appearance
- Complete set simplifies restoration or replacement projects — includes both sides and inner/outer pieces
- Designed for ease of installation with existing mounting locations; can use factory clips or adhesive as required
Installation / Application:
- Difficulty: 2/5
- Estimated time: 30-60 minutes
Instructions:
- Park vehicle on a level surface, engage parking brake, and lower the windows slightly (if applicable) to access the beltline area.
- Use masking tape above the molding to protect paint and glass edges while removing the old molding.
- Carefully pry off the old molding using a plastic trim removal tool; remove any fasteners or screws and retain hardware if reusable.
- If clips are present, remove and inspect them; replace any broken clips with new ones before installing the new molding.
- Clean the mounting surface thoroughly with isopropyl alcohol or panel cleaner to remove dirt, grease, and old adhesive residue; allow to dry.
- Test-fit each new molding piece to ensure correct orientation and alignment (inner/outer, left/right).
- If the molding uses clips: align the molding with the mounting holes and press firmly until clips snap into place. If adhesive is required: apply a thin bead of recommended adhesive/sealant to the channel, position the molding, and press firmly.
- Reinstall any retained screws or fasteners and check that the molding sits flush along the beltline without gaps or lifting.
- Clean the installed moldings and remove masking tape. Allow adhesive/sealant to cure per manufacturer recommendations before exposing to water or high-speed driving.
- Perform a final inspection for fit, finish, and secure attachment; test window operation to ensure there is no interference.
About Precision Replacement Parts
Since 1986 Precision Replacement Parts has been a trusted name in the Automotive Glass Industry.
Our knowledge and experience in manufacturing millions of extruded and molded EPDM Rubber, PVC and HDPE based plastics, and various stamped and extruded metal products for the classic and late model industries has allowed Precision to expand our services into multiple product markets.
Along with our own USA based production facility, Precision also partners with 25 different manufactures worldwide with a reputation as a global leader supplying OEM and replacement products to a number of different industries. Our partnerships along with our own in-house manufacturing and fabrication capability gives Precision a unique position in helping to meet the expanding needs of customers everywhere, providing them with a sustained competitive advantage.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
C10 Panel |
1960 - 1963 |
| Chevrolet |
C10 Pickup |
1960 - 1963 |
| Chevrolet |
C20 Pickup |
1960 - 1963 |
| Chevrolet |
C30 Pickup |
1960 - 1963 |
| Chevrolet |
C40 |
1960 - 1962 |
| Chevrolet |
C50 |
1960 - 1963 |
| Chevrolet |
K10 Pickup |
1960 - 1963 |
| Chevrolet |
K20 Pickup |
1960 - 1963 |
| Chevrolet |
Suburban |
1960 - 1963 |
| GMC |
1000 Series |
1960 - 1963 |
| GMC |
1500 Series |
1960 - 1963 |
| GMC |
2500 Series |
1960 - 1963 |
| GMC |
3000 |
1960 - 1963 |
| GMC |
3500 |
1960 - 1963 |
| GMC |
Suburban |
1960 - 1963 |
