The clutch fork and connecting linkage convert the movement of the clutch pedal to the back-and-forth movement of the clutch throw-out bearing. To disengage the clutch, the release bearing is moved toward the flywheel by the clutch fork…
The bellhousing to clutch fork rubber boot seals out water and dust by sealing around the clutch fork and the rectangular fork hole in the Camaro clutch bellhousing. Every time you push the clutch pedal in your manual transmission Camaro…
The role of the Clutch Linkage Retainer Clip is to hold the cable in place and prevent it from moving around ensuring functionality and longevity. You will find the fit and function meets all GM specifications. This clutch linkage retainer…
Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft sleeve for clutch and brake pedals with 5/8" diameter cross shaft. These OER® reproduction bushings will help eliminate excessive side to side…
Best Quality Reproduction Brake & Clutch Pedal Bushings
Plastic Sleeve Bushings As Original
Set Of 4
For Brake Pedal On Full Size With Automatic Transmission
For Clutch & Brake Pedal On Full Size With Manual…
The clutch cross shaft is a piece of steel that slides into the transmission case, and it is the pivot point for the fork that pushes onto you clutch diaphragm. Basically, if it were to fall out you wouldn't be able to operate the clutch…
Pair that seals to the top of the quarter post on each door
Replaces the cracked, chipped, or missing Quarter Post Seals to avoid interior damage
Made with high-quality rubber with steel inserts
Matches OE specifications for…
Reproduction Of Original Screws Into Bellhousing Your clutch fork ball stud is what is used to screw into your 1967, 1968, or 1969 Camaro?s bellhousing to mount the clutch fork. The clutch fork is used to push the throwout bearing in when…
Stock Replacement Original GM Part Stamped Steel Semi-Gloss Black Fits Many Small Block Applications Using A 10? Bellhousing & 153 Tooth Flywheel 1967-1969 302 Z/28, 327 1969-1974 307 1970 350 Whether you are hearing unwanted rattling…
This 1963-1981 Corvette Clutch Pivot Stud Nylon Seat is made to original specifications and is the perfect fit for your 1963-1981 Corvette. It is designed to meet, or exceed, original performance.
Replacement Stud
2…
The bellhousing to clutch fork rubber boot seals out water and dust by sealing around the clutch fork and the rectangular fork hole in the clutch bellhousing. Every time you push the clutch pedal in your manual transmission Chevelle, the…
OER® reproduction of the upper clutch push rod boot. This rubber boot mounts on the firewall and prohibits water, chemicals, and other elements from entering the drivers compartment through the clutch rod…
Set Of 6 Correct High Grade Bolts Attaches Pressure Plate To Flywheel Heat Treated To Grade 8 Includes Matching Washers Fasteners Yield 120,000 Psi Black Plated Finish 3/8-16 Thread Size Bolts Correct Through 1987, Will Need Different…
Set of four reproduction pedal shaft bushings. Used with all automatic and manual pedals. Group 0.831 and 4.626 GM Part #: 3798256, 3965692, 1247439, 140048221…