Makes turn signal switch installation much easier with a new
connector as it is difficult to remove them from the original
switches. Same for both tilt wheel & non tilt.…
Makes turn signal switch installation much easier with a new
connector as it is difficult to remove them from the original
switches. Same for both tilt wheel & non tilt.…
Scott Drakes 1964-66 Mustang Turn Signal Lever is a perfect copy of the original. Featuring fine chrome plating to replace those rusted or tweaked originals.
…
Features:
• Complete Switch
• Color Coded Wiring
• Functions as Original
• Before Serial# G30,001 for 1969
Note: Horn contact (C20Z-13A821-A) and wiring connector housing (C8AZ-14489-SR) sold separately.
…
Connects both passenger side and driver side turn signal lamps and plugs into firewall harness. Includes sockets
Features:Factory Correct Terminals and ConnectionsCorrect color coded wiring for easy installation
…
Replacement 18 Gauge Pigtail Black Plastic Clamp Style Three Terminal Connector The dimmer switch on the Chevelle is in a place which makes it and the wiring very susceptible to damage. Not to mention, you stomp the area with your foot to…
New harness used for the special hood turn signal indicators on 1967 ancheros and Fairlanes equipped with power dome dual hood scoops. Made in the usa!
…
High Quality Reproduction Chrome Plated Black Knob A broken turn signal lever can lead to a truck that can't use its turn signal which is a danger to your truck and other drivers. This high quality reproduction is chrome plated and…
This exact, high-quality, reproduction of the original, 1969 wiring system includes multicolored wires with metal pins; a wiring harness; a turn signal-canceling cam, which automatically turns off your signal after you make your turn, and…
Reproduction Of Original Correct Color Wiring Correct Connectors Included With TS-10 This Camaro reproduction wiring harness has been manufactured to original factory specifications using today's modern manufacturing techniques. You will…
Reproduction Of Original MADE IN USA
Electrical switches are usually taken for granted until they don't work. After years and years of use, the original equipment turn signal switch in your Mustang may be ready to fail…
Instead of mounting onto your steering column, it hides neatly out of sight under the dash or behind a kick panel, where it is held in place by strong 3m velcro strips.
A small wire attaches to the gearshift lever, where a tiny…
This once hard-to-find part is now made by Scott Drake! This part makes installing the 68-69 Mustang turn signal switch easier. Made from translucent ABS plastic using the original Ford print.
…