855.444.6872 Contact Us Mon-Sat 10a-6p
DRIVEN BY CARE

Holley Sniper Diecast Retrofit Carbureted Fuel Pump 19-365

Holley Sniper Diecast Retrofit Carbureted Fuel Pump 19-365
Holley Sniper Diecast Retrofit Carbureted Fuel Pump 19-365Holley Sniper Diecast Retrofit Carbureted Fuel Pump 19-365Holley Sniper Diecast Retrofit Carbureted Fuel Pump 19-365Holley Sniper Diecast Retrofit Carbureted Fuel Pump 19-365Holley Sniper Diecast Retrofit Carbureted Fuel Pump 19-365Holley Sniper Diecast Retrofit Carbureted Fuel Pump 19-365Holley Sniper Diecast Retrofit Carbureted Fuel Pump 19-365Holley Sniper Diecast Retrofit Carbureted Fuel Pump 19-365Holley Sniper Diecast Retrofit Carbureted Fuel Pump 19-365Holley Sniper Diecast Retrofit Carbureted Fuel Pump 19-365
$503.99 ea
NEWARRIVING SOONEstimated Ship Date 04/22/2024 (If Ordered Today)10 Available from HOLLEY PERFORMANCE PRODUCTS as of 03/28/2024
Model: 3993116
STANDARD
DELIVERY
External electric fuel pumps have been the performance standard for decades. They continue to perform well, however, the evolution of fuel pump technology has surpassed them in quiet operation and fuel delivery capabilities that an in-tank module can deliver. Looking ahead to the future, Sniper has designed their latest retrofit pump module especially for the carbureted applications. The module design is very similar to the existing EFI pump modules using a 340 LPH pump, but includes a built-in regulator for lower fuel pressure that carburetor applications require. Now you can convert your factory tank or fuel cell to an in-tank fuel system quickly and easily! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a die cast pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Once installed, hook up your fuel lines and your power source/ground and you're off and running! NO hassle! An added bonus is that you can upgrade this module if you eventually change to an EFI system by changing the internal regulator. Supports up to 900 Carb HP (@ 6 PSI at 13.5 Volts / 10.4 AMP Draw) of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, fuel cell location, etc...
Features:
  • The Easiest Way To Convert Your Vehicle To An In-tank Fuel System
  • Installs In Any Fuel Tank From 7 In. To 12 In. Deep
  • To Fit A Wide Variety Of Applications
  • The Low Profile Design Is Only 1.275 In. Thick
  • Above The Tank Mounting Surface For Added Clearance When Needed
  • The Innovative Clamping System Allows You
  • To Locate The Module Anywhere In The Tank Beside
  • Your Existing Sending Unit
  • The Clamping System Allows You
  • To Rotate The Unit 360 Degrees For Easier Clocking
  • Of The Plumbing And Wiring Locations Under Your Ride
  • Die Cast Aluminum Construction
Holley Performance Emission Code 5: This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled (Non-Emissions Controlled) Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations
Installation Notes:
It is recommended to use a Holley 12-753 30 Amp Fuel Pump Relay along with a minimum size of 12 Gauge wire for your installation.

About Holley Performance Products

Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors powered every Monster Energy NASCAR Cup team and nearly every NHRA Pro-Stock champion for four decades. Now, Holley EFI products power these cars and are dominating the performance world. Holley products for GM's popular LS engine are dominating the LS scene as well. Holley's products also include performance fuel pumps, intake manifolds and engine dress-up products for street performance, race and marine applications. As a single solution or partnered with products from other Holley companies we can give you the edge you need over the competition!

Downloads:

Download Name File Size
199r11511.pdf823.65KB

Specifications:

Application Universal
Diameter 4.8"
Emission Code 3
Free Flow LPH 340
Fuel System Type Gasoline/E85 Compatible
Fuel Type E85
Material Die Cast Aluminum
NPT Thread 1/4 NPT
Part Type Fuel Pump Module Assembly
WARNING CA Proposition 65 WARNING: Cancer and Reproductive Harm

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Holley Sniper Diecast Retrofit Carbureted Fuel Pump 19-365:
Muscle Cars & Classics 2024