Your shopping cart is empty!
DRIVEN BY CARE
-
My Account Sign In / Register
×
Select Your Vehicle to Shop for the Correct Parts:
Show More Filters
Show results for
Refine By
Availability
On Sale
Condition
Price
Under $10 (8)$10 to $25 (41)$25 to $50 (42)$50 to $100 (43)$100 to $250 (51)$250 to $500 (58)$500 & Above (11)
$ to $ go
Manufacturer
Show Less Filters
Model: 3142516
Condition: NEW
Made using NOS pattern & the original Ford blue prints.
Originals rust bad because they were bare steel, ours are zinc
plated to prevent rusting.
.
…
Model: 3155470
Condition: NEW
Exact original specifications using the original blue prints…
Model: 3179671
Condition: NEW
Exact reproduction of originals made using the original blue prints.
Originals are always rusty.
…
Model: 3942123
Condition: NEW
Inner and outer.
Mounts to the lower door hinge, the roller rides on these
tension arms and holds the door open. Originals tend to break
over time from wear and then the door will not have tension
to stay open. Heat treated…
Model: 3941847
Condition: NEW
Requires 2 per car. Exact reproduction of originals made using the original Ford blue prints!
Made with a zinc plated metal cable housing so they look just like the originals!…
Model: 3941857
Condition: NEW
Requires 2 per car. Exact reproduction of originals made using the original Ford blue prints!
Made with a zinc plated metal cable housing so they look just like the originals!…
Model: 3942120
Condition: NEW
For 1982-86 GT & SVO. Does not fit conv. drivers side door.
Excellent reproduction made using NOS patterns & the original Ford
blue prints. Packaged in a nice white box.
Also fits: 1983-89 Conv. rear quarter power…
Model: 3941748
Condition: NEW
These nylon bezels hold the switch to the rear door jamb just
below the stricker.
Plastic gets brittle with time and these are usually broken.
Exact reproduction of originals made using the original blue prints.…
Model: 3942376
Condition: NEW
Yellow zinc plated exactly like the originals.
Mounts on the rear frame rail and holds the tail pipe.
Also used for 79-84 when installing dual exhaust.
Exact reproduction of originals made using the original Ford blue prints.
…
Model: 3942375
Condition: NEW
Yellow zinc plated exactly like the originals.
Mounts on the rear frame rail and holds the tail pipe.
Also used for 79-84 when installing dual exhaust.
Exact reproduction of originals made using the original Ford blue prints.
…
Model: 3140824
Condition: NEW
Exact reproduction of original made from using the original blue prints.…
Model: 3128124
Condition: NEW
Original design from Ford blue prints to ensure a perfect fit.
…
Model: 3011283
Condition: NEW
Original design from Ford blue prints to ensure a perfect fit.
…
Model: 3073589
Condition: NEW
This neutral safety switch was unexpectedly made obsolete by Motorcraft and availability was getting scarce. Now available from Scott Drake, this high-quality reproduction of the original neutral safety switch, also known as a backup light…
Model: 1011352
Condition: NEW
Show Quality Reproduction
Paint As Required
Made In USA With Original GM Blue Prints
…
Model: 3942089
Condition: NEW
Exact reproductions of original!
The stainless steel structure is rust resistant to the core unlike plated
steel that can easily corrode in ethanol.
Includes ethanol resistant seal, float and the correct retainer ring.
Made using…
Model: 1004123
Condition: NEW
KEY FEATURES & BENEFITS:
Show Quality Replacement
Triple Chrome Plated
Fits 1963-1967 Corvette Sting Ray Coupes & Convertibles
Does Not Include Mounting Hardware - See P/ N 3208473
Driver Quality Version…
Model: 3126576
Condition: NEW
Mounts on the steering column around the switch knob.
Exact reproduction of originals made using the original blue prints.…
Model: 4993825
Condition: NEW
Switch that mounts in the door jamb (3 pin).
Exact reproduction of original made from the original blue prints.
1971-73 LH drivers door
1970-73 RH for use with auto seat latch only.
…
Model: 3942097
Condition: NEW
Exact reproductions of original!
The stainless steel structure is rust resistant to the core unlike plated
steel that can easily corrode in ethanol.
Includes ethanol resistant seal, float and the correct retainer ring.
Made using the…
Model: 3011285
Condition: NEW
Original design from Ford blue prints. Blue painted tube.
…
Model: 4993998
Condition: NEW
Exact reproduction or originals made using original blue prints.
Unlike some made by others, ours:
1. Has the correct cowl radius, not flat.
2. Has correct screw hole spacing that does not require the center screw
to go in at an…
Model: 4993816
Condition: NEW
Includes special metal mounting clips
Exact reproduction with exact grain texture like originals.
Made using the original blue prints.…
Model: 3937581
Condition: NEW
This 1964-67 Mustang Steering Column Shaft Bushing is an exact replica of original Fords improved service replacement part. It was designed using the original Ford prints for a factory fit. The updated nylon constructions delivers improved…
Model: 3228285
Condition: NEW
Exact reproduction of original with correct grain texture.
Made using the original blue prints.…
Model: 4993820
Condition: NEW
Exact reproduction of original! Made from high
quality rubber that will not tear easily like some that
are available on the market.
Made using the original Ford blue prints and an
original shift lever to check for a good snug fit.
…
Model: 4993457
Condition: NEW
Made exactly like originals using the original blue prints.
…
Model: 4916446
Condition: NEW
Molded plastic Route 66 sign. 11 ½” x 11”, lettering and borders shown in black are raised
CORVETTE POSTERS PRINTS RT66
…
Model: 3938281
Condition: NEW
These Brackets are made by Scott Drake from stamped steel just like the original and built following Ford prints for an exact fit. Painted the correct OEM black just like the originals. Designed for use with original-style, 3 core…
Model: 3232017
Condition: NEW
Original design from Ford blue prints ensures a perfect fit.
…
Model: 3229178
Condition: NEW
Now made by Scott Drake, a high quality 1965-66 Mustang Hi-Po 6 bolt Clutch Equalizer Bar made from fabricated steel with natural grey powder coating and precision welds. Made from original Ford prints. Features a hidden grease zerk to…
Model: 3194131
19" X 25" High Quality Print By Hugo Prado Limited Edition Of 4000 Prints Perfect For The Home, Office, Or Mancave! Can Be Ordered Framed. (See Drop Down Options) These prints offer the finest automotive art in original car art prints…
Model: 3010237
Condition: NEW
Same beautiful chrome as our headlight switch retainer. This nut is almost always damaged from improper tools used for removal and installation. Made from original factory prints.
…
Model: 3013855
Condition: NEW
12 x 24 The 1964 thunderbolt is a car that will forever hold its place in Ford racing history. These rare production race cars were built with the ominous 427 motor and designed for drag racing. If you have seen or watched one of these…
Model: 3013854
Condition: NEW
Artist renderings of your favorite classic Fords by automotive artist duke edwards. These are beautiful prints suitable for framing. Limited edition prints measure 14 X 20. Supplies are Limited, don't delay!…
Model: 3013841
Condition: NEW
Highly detailed custom prints are black and white and are suitable for framing. They come signed and most are approximately 11 inches high by 17 inches long. Check out these new studio quality prints of your favorite classic Ford cars…