These Corvette reproduction telescoping steering column lock ring lock screws have been manufactured to original factory specifications using today's modern manufacturing techniques.
Reproduction Of Original
…
This bearing is used for the tilt and telescopic steering column shaft. Two are required, as it is the same upper and lower.
This bearing is 1.570 inches outer diameter x 1.108 inch inner diameter x .332 inch thick.
CORVETTE TELESCOPIC…
Reproduction Of Original Correct Sponge Seal This Chevelle reproduction steering column seal has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function…
Reproduction Of Original Correct Sponge Seal This Chevelle reproduction steering column seal has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function…
This is a reproduction of the original boot for 1967-69 models that slides over the steering column at the base of the floor. This rubber part is commonly cracked or melted from brake fluid exposure. Replacing your boot will help keep…
By the late 1950s, Chevrolet’s passenger car lineup had grown in size and power. The combination of these factors places a great duty on the steering system of these vintage bowtie vehicles. This lower mast jacket steering column bearing…
High Quality Replacement Steering Column Bearing Best Reproduction Of The Original GM Parts Includes Tension Spring, Retaining Ring & Horn Wire Lead Held In Place Under Steering Wheel Cures Annoying Side To Side Play In The Steering…
1975-1982 Corvette Diecast Zinc Upper Horn Contact Lock Ring with Tilt and Telescopic Column. The posts on this spacer are 5/8" tall.
TELESCOPIC COLUMNS SPACERS
…
ididit's 1955-68 Horn Kit has everything you need to adapt most 1955-68 GM stock steering wheels to your ididit steering column. This horn kit fills the gap between the wheel and the column and even allows you to retain horn function…
Reproduction Of Original This Chevelle reproduction lower steering column cover has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work…
This spring is on the upper steering shaft. It rests against the upper bearing. It fits inside of the turn signal switch – it doesn’t touch it. This spring provides the upward pressure on the lock plate.
Dimensions: Total height =…
New by Drake from the original Ford factory print, these 1964-67 Mustang Steering Column Lower Seals are an exact fit. Note: Fits 1967 cars with a long steering shaft.
…
These shift indicators are tailored with style that will keep you from guessing. Whether you crave the 3 speed, 4 speed, Ford AOD, or ADODE, ididit's shift indicators are perfect for your column. They have adhesive tape that clings to your…