IMPORTANT: Electrical items are covered by a 30 day EXCHANGE ONLY WARRANTY. There are no returns or refunds on such items.Reproduction "Final Design" turn signal switch for 1967-71 Mopar A, B, C, & E-Body models without tilt wheel. This switch comes with metal connectors attached to the ends of the wires and includes the plastic connector for a solder and splice-free plug-in installation. 2-3/4" from outside of arm to outside of arm.
This switch is modeled after the final design by Chrysler Corporation who changed the design several times over the years. Note the wires on the actuator. Please verify that this switch is correct for your application before purchasing. Saginaw also produced a switch that was used in some of the the same models listed below. The Saginaw switch is radically different, as are the bolt patterns. These two switches are not interchangeable.
Note: Depending on what version of switch your vehicle used, and whether or not your switch has been replaced in the past, the actuator (turn signal cam) may be different on your old switch.
Plymouth A-Body Applications:
Dodge A-Body Applications:
Plymouth B-Body Applications:
Dodge B-Body Applications:
Plymouth C-Body Applications:
Dodge C-Body Applications:
Chrysler C-Body Applications:
Plymouth E-Body Applications:
Dodge E-Body Applications:
OER® was established in the early 1980's to manufacture original equipment reproductions where every part is meticulously reproduced to exact factory specifications. All OER® parts are reverse engineered or manufactured using original blueprints when available to ensure the closest possible reproduction available on the market. When available, original factory tooling is utilized to insure complete originality. Our mission is to supply the highest quality parts available for the enthusiast and serious restorer. Whether you're a serious restorer, or just someone who wants a replacement part for your classic vehicle, OER® is the source for the finest quality parts on the market. Today, OER® is the most recognized brand in automotive restoration parts. Choose OER® for all your restoration needs.
Many OER® products are officially licensed by General Motors and the Chrysler Group ensuring the quality and authenticity of these products. The GM Restoration Parts logo and the MOPAR Authentic Restoration Product logo are the true signs of quality. OER® is licensed by GM and the Chrysler Group as an official restoration parts manufacturer.
| Make | Model | Years |
| Chrysler | 300 | 1967 - 1969 |
| Chrysler | New Yorker | 1967 - 1969 |
| Chrysler | Newport | 1967 - 1969 |
| Chrysler | Town & Country | 1967 - 1969 |
| Dodge | Challenger | 1971 |
| Dodge | Charger | 1967 - 1971 |
| Dodge | Coronet | 1967 - 1971 |
| Dodge | Dart | 1967 - 1971 |
| Dodge | Monaco | 1967 - 1971 |
| Dodge | Polara | 1967 - 1971 |
| Plymouth | Barracuda | 1967 - 1971 |
| Plymouth | Belvedere II | 1967 |
| Plymouth | Belvedere | 1967 - 1971 |
| Plymouth | Cuda | 1970 - 1971 |
| Plymouth | Duster | 1970 - 1971 |
| Plymouth | Fury III | 1967 - 1971 |
| Plymouth | Fury II | 1967 - 1971 |
| Plymouth | Fury I | 1968 - 1971 |
| Plymouth | Fury | 1967 - 1971 |
| Plymouth | GTX | 1967 - 1971 |
| Plymouth | Road Runner | 1968 - 1971 |
| Plymouth | Satellite | 1967 - 1971 |
| Plymouth | Scamp | 1971 |
| Plymouth | Superbird | 1970 |
| Plymouth | VIP | 1967 |
| Plymouth | Valiant | 1967 - 1971 |
| Height | 11 in |
| Length | 2 in |
| Weight | 1 lbs |
| Width | 7 in |
