Front lower left-hand ball joint for 1995-2004 Toyota Tacoma designed to restore safe steering and suspension geometry. This replacement ball joint secures the lower control arm to the steering knuckle, providing precise wheel alignment, reduced play, and reliable handling under load. Built for durability and corrosion resistance, it offers a direct-fit solution for routine maintenance, collision repair, or suspension refresh projects. Easy to install with common shop tools, it helps eliminate steering wander, uneven tire wear, and suspension noise for confident, long-lasting performance.
Features:
- Fitment: 1995-2004 Toyota Tacoma — front lower, left-hand (driver side) ball joint.
- Direct-fit replacement engineered to restore correct steering and suspension alignment.
- High-strength steel construction with protective finish for corrosion resistance and durability.
- Press-fit design secures the lower control arm to the steering knuckle to eliminate play.
- Helps prevent uneven tire wear, steering wander, and suspension noise for improved ride quality.
- Ideal for routine maintenance, restoration projects, or collision repair of Tacoma front suspension.
Installation / Application:
- Difficulty: 3/5
- Estimated time: 60-120 minutes
Instructions:
- Park vehicle on level ground, set parking brake, and chock rear wheels.
- Loosen front wheel lug nuts slightly, then raise the vehicle and support on jack stands; remove the front left wheel.
- Remove cotter pin and castle nut from the outer tie rod end; separate the tie rod end from the knuckle using a tie rod puller or hammer strike on the knuckle.
- Remove the brake caliper and rotor as needed to access the lower control arm; support caliper to avoid stress on the brake hose.
- Disconnect sway bar end link and any ABS or sensor wiring routed near the control arm if necessary.
- Remove the lower control arm-to-ball joint retaining nut and press or separate the ball joint stud from the steering knuckle using a ball joint separator or hammer and punch.
- Use a ball joint press to press the old ball joint out of the control arm. Apply penetrating oil and ensure safe, steady pressure throughout the press operation.
- Clean the control arm bore of debris and inspect for damage; if the control arm is worn or cracked, replace the control arm instead of installing a new ball joint.
- Press the new ball joint into the control arm to the specified depth. Install the retaining clip or circlip if provided.
- Reinstall the control arm and seat the ball joint stud into the steering knuckle. Torque the ball joint nut to manufacturer specification and install a new cotter pin if applicable.
- Reattach tie rod end, sway bar links, brakes, and any removed wiring. Torque all fasteners to the vehicle manufacturer's specifications.
- Reinstall the wheel, lower the vehicle, and torque lug nuts to spec. Test drive and have a professional wheel alignment performed to ensure proper tracking and tire wear.
About Redline Select
Redline Restomotive® has established itself as a premier brand in the world of classic car restoration, providing enthusiasts with high-quality parts that meet the exacting standards of original manufacturer specifications. Dedicated to the preservation of American automotive history, Redline Restomotive® combines advanced manufacturing techniques with an in-depth understanding of vintage vehicles. The result is a range of products that seamlessly blend into the design and function of classic cars, giving restorers and collectors the assurance that each part reflects the era’s style, quality, and performance.
Redline Select® is our premium line of steering and suspension products for all vehicle makes and models including both North American and Import vehicles. We have partnered with an ISO 9001/QS9000/TS16949 certified manufacturing facility with more than 40 years of experience in producing components that perform to the standards our customers expect. Our steering and suspension parts are backed by multiple quality control checks along the way—during production, prior to shipping from the factory, and at arrival. With our ISO 9001:2015 certification, we observe the world’s highest standards for quality management.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Submodel |
Years |
| Toyota |
Tacoma |
Pre Runner |
1998 - 2004 |
| Toyota |
Tacoma |
|
1995 - 2004 |
