Front outer tie rod end for 2007-2018 Acura RDX, designed to replace worn or damaged steering components and restore precise steering feel and alignment. This replacement tie rod end secures the steering linkage to the wheel hub, maintaining correct toe settings and reducing play, vibration, and uneven tire wear. Built for durability and reliable performance, it provides corrosion resistance and smooth operation for safe, predictable steering response. Ideal for repair, restoration, or routine maintenance to return the vehicle to factory steering specifications.
Features:
- Fits 2007-2018 Acura RDX — front outer tie rod end, right or left hand.
- Durable metal construction with corrosion-resistant finish for long service life.
- Replaces worn steering linkage to reduce play, vibration, and uneven tire wear.
- Restores proper alignment and steering response for safer handling.
- Direct-fit replacement for easy installation and serviceability during repairs.
Installation / Application:
- Difficulty: 3/5
- Estimated time: 45-90 minutes per side
Instructions:
- Park on level ground, engage parking brake and loosen front wheel lug nuts slightly.
- Raise vehicle with jack and secure on jack stands. Remove the front wheel.
- Locate the outer tie rod end where it connects to the steering knuckle and the inner tie rod.
- Mark the position of the old tie rod on the threaded section with a marker to preserve approximate alignment; count thread turns or measure length from a fixed point for reference.
- Apply penetrating oil to nuts and studs to ease removal.
- Remove cotter pin (if present) and loosen the castellated nut securing the tie rod end to the steering knuckle. Use a ball joint separator or tie rod puller to separate the tie rod end from the knuckle.
- Loosen the jam nut on the inner tie rod and unscrew the outer tie rod end from the inner tie rod using the recorded measurements to maintain alignment.
- Install the new outer tie rod end by threading it onto the inner tie rod to the marked position or measured length. Tighten the jam nut against the new tie rod end.
- Install the tie rod end stud into the steering knuckle, tighten the castle nut to the manufacturer's specified torque, and insert a new cotter pin if required.
- Reinstall the wheel, lower the vehicle, and torque the lug nuts to specification.
- Have a professional wheel alignment performed after installation to ensure correct toe and steering geometry.
About Redline Select
Redline Restomotive® has established itself as a premier brand in the world of classic car restoration, providing enthusiasts with high-quality parts that meet the exacting standards of original manufacturer specifications. Dedicated to the preservation of American automotive history, Redline Restomotive® combines advanced manufacturing techniques with an in-depth understanding of vintage vehicles. The result is a range of products that seamlessly blend into the design and function of classic cars, giving restorers and collectors the assurance that each part reflects the era’s style, quality, and performance.
Redline Select® is our premium line of steering and suspension products for all vehicle makes and models including both North American and Import vehicles. We have partnered with an ISO 9001/QS9000/TS16949 certified manufacturing facility with more than 40 years of experience in producing components that perform to the standards our customers expect. Our steering and suspension parts are backed by multiple quality control checks along the way—during production, prior to shipping from the factory, and at arrival. With our ISO 9001:2015 certification, we observe the world’s highest standards for quality management.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Acura |
RDX |
2007 - 2018 |
