A matched pair of outer left and right beltline moldings designed to restore the clean, finished edge where the door glass meets the body. These moldings secure and protect the beltline trim, prevent water intrusion and edge damage, and bring back the factory appearance for worn or missing pieces. Engineered for a precise fit and durable, corrosion-resistant performance, the kit is ideal for restoration, maintenance, and cosmetic repair projects that demand reliable fit and long-lasting finish.
Features:
- Durable, corrosion-resistant construction for long service life.
- Restores the finished edge between door glass and body to original appearance.
- Secures beltline trim and helps prevent water intrusion and paint damage.
- Sold as a matching outer left and right hand pair for consistent fit and finish.
- Engineered for straightforward installation with OEM-style fitment and attachment points.
Installation / Application:
- Difficulty: 2/5
- Estimated time: 30-60 minutes
Instructions:
- Park vehicle on level ground and lower the window to access the beltline area.
- Carefully remove the old molding: use a plastic trim tool or wrapped flat screwdriver to pry clips free and avoid scratching paint.
- If clips are broken, remove remaining fasteners and clean the mounting channel of dirt, old adhesive, and corrosion.
- Dry-fit the new left and right moldings to confirm orientation and alignment with mounting holes or clips.
- If adhesive or sealant is used by your vehicle, apply a compatible automotive adhesive/sealant per manufacturer directions to the mounting surface.
- Press the molding into place, engaging clips or fasteners. Use masking tape to hold the molding aligned while adhesive cures, if needed.
- Operate the window through its full travel to confirm clearance and proper seating of the molding.
- Clean any excess adhesive or fingerprints with isopropyl alcohol and allow the assembly to sit for the adhesive cure time recommended by the adhesive manufacturer.
- Recheck fasteners and clip engagement after a short test drive; tighten or reposition as required.
About Precision Replacement Parts
Since 1986 Precision Replacement Parts has been a trusted name in the Automotive Glass Industry.
Our knowledge and experience in manufacturing millions of extruded and molded EPDM Rubber, PVC and HDPE based plastics, and various stamped and extruded metal products for the classic and late model industries has allowed Precision to expand our services into multiple product markets.
Along with our own USA based production facility, Precision also partners with 25 different manufactures worldwide with a reputation as a global leader supplying OEM and replacement products to a number of different industries. Our partnerships along with our own in-house manufacturing and fabrication capability gives Precision a unique position in helping to meet the expanding needs of customers everywhere, providing them with a sustained competitive advantage.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
Blazer |
1992 - 1994 |
| Chevrolet |
C1500 Suburban |
1995 - 1999 |
| Chevrolet |
C1500 |
1988 - 1999 |
| Chevrolet |
C2500 Suburban |
1992 - 1999 |
| Chevrolet |
C2500 |
1988 - 2000 |
| Chevrolet |
C3500 |
1988 - 2000 |
| Chevrolet |
K1500 Suburban |
1992 - 1999 |
| Chevrolet |
K2500 Suburban |
1992 - 1999 |
| Chevrolet |
K2500 |
1988 - 1999 |
| Chevrolet |
K3500 |
1988 - 1999 |
| Chevrolet |
Tahoe |
1995 - 2000 |
| GMC |
C1500 Suburban |
1992 - 1999 |
| GMC |
C1500 |
1988 - 1999 |
| GMC |
C2500 Suburban |
1992 - 1999 |
| GMC |
C2500 |
1988 - 1999 |
| GMC |
C3500 |
1988 - 1999 |
| GMC |
K1500 Suburban |
1992 - 1999 |
| GMC |
K2500 Suburban |
1992 - 1999 |
| GMC |
K2500 |
1988 - 1999 |
| GMC |
K3500 |
1988 - 1999 |
| GMC |
Yukon |
1992 - 1999 |
