This 2-piece left and right door weatherstrip seal kit DWP 1112 67 replaces worn or damaged door seals to restore a reliable, weather-tight closure. Designed to stop water intrusion, reduce wind noise, block dust, and protect interior surfaces, the kit improves comfort and helps preserve vehicle value. Constructed from durable, long-lasting rubber compound with a precision profile for consistent fit and sealing performance, the seals are corrosion-resistant and made for restoration or routine replacement. Easy to trim and install, this kit provides a dependable solution to eliminate leaks and rattles while maintaining proper door engagement.
Features:
- Left and right door seals — 2-piece kit (DWP 1112 67) for door weatherproofing and noise reduction.
- Manufactured from a durable rubber compound designed to resist ozone, UV and temperature-related degradation.
- Profiles engineered to compress and seal gutters and edges to prevent water, dust and wind noise.
- Simple retrofit replacement for worn OEM weatherstrips — restores original sealing performance.
- Easy-to-install design that can be trimmed for a precise fit; suitable for restorations and routine maintenance.
- Helps protect interior trim and metal surfaces from moisture-related damage and corrosion.
Installation / Application:
- Difficulty: 2/5
- Estimated time: 30-60 minutes
Instructions:
- Park vehicle on level ground and open the door where the seal will be replaced.
- Carefully remove the old weatherstrip: peel or pry out retaining clips and adhesive, taking care not to damage the door flange or paint.
- Clean the door flange and seal channel thoroughly with rubbing alcohol or an adhesive cleaner to remove old adhesive, dirt, and residue; allow to dry.
- Test-fit the new seal pieces to confirm orientation (left vs. right) and length; trim excess with a utility knife if necessary.
- If the new seal has adhesive backing, peel the liner and press the seal firmly into place along the door flange. If adhesive is required, apply a thin, even bead of weatherstrip adhesive to the flange or seal per adhesive instructions, then press into position.
- Work along the length of the seal, pressing firmly and using masking tape to hold sections in place if needed until adhesive sets.
- Close and open the door several times to seat the seal and check for proper compression and alignment. Adjust or trim as needed for a uniform seal.
- Allow any applied adhesive to cure fully per the adhesive manufacturer’s recommended time before exposing to moisture or driving.
About Precision Replacement Parts
Since 1986 Precision Replacement Parts has been a trusted name in the Automotive Glass Industry.
Our knowledge and experience in manufacturing millions of extruded and molded EPDM Rubber, PVC and HDPE based plastics, and various stamped and extruded metal products for the classic and late model industries has allowed Precision to expand our services into multiple product markets.
Along with our own USA based production facility, Precision also partners with 25 different manufactures worldwide with a reputation as a global leader supplying OEM and replacement products to a number of different industries. Our partnerships along with our own in-house manufacturing and fabrication capability gives Precision a unique position in helping to meet the expanding needs of customers everywhere, providing them with a sustained competitive advantage.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
C10 Pickup |
1967 - 1972 |
| Chevrolet |
C20 Pickup |
1967 - 1972 |
| Chevrolet |
C30 Pickup |
1967 - 1972 |
| Chevrolet |
C50 |
1967 - 1972 |
| Chevrolet |
K10 Pickup |
1967 - 1972 |
| Chevrolet |
K20 Pickup |
1967 - 1972 |
| GMC |
C15/C1500 Pickup |
1967 - 1972 |
| GMC |
C25/C2500 Pickup |
1967 - 1972 |
| GMC |
C35/C3500 Pickup |
1967 - 1972 |
| GMC |
K15/K1500 Pickup |
1967 - 1972 |
| GMC |
K25/K2500 Pickup |
1967 - 1972 |
| GMC |
K35/K3500 Pickup |
1968 - 1972 |
