The Precision Door Weatherstrip Seal Kit (DWB 1110 07) is a left-or-right door sealing solution designed to protect vehicle interiors from water, wind, and road noise. This kit replaces worn or damaged door seals to restore a tight, durable barrier between door and frame, improving cabin comfort and preventing corrosion. Verify fitment for your specific vehicle using the part number DWB 1110 07 before purchase; the kit is ideal for restoration and routine maintenance.
Features:
- Left or right hand door kit — part DWB 1110 07 for universal door-side replacement.
- High-quality rubber construction resists UV, ozone and temperature extremes for long life.
- Creates a watertight and airtight seal to prevent leaks, drafts and road noise.
- Direct-fit profile conforms to door frame for secure, consistent contact and reduced vibration.
- Easy replacement for restoring original sealing performance and protecting interior trim and electronics.
Installation / Application:
- Difficulty: 2/5
- Estimated time: 30-60 minutes per door
Instructions:
- Open the door and remove the old weatherstrip: carefully pull along the seal and use a trim tool to disengage any clips.
- Cut away any remaining adhesive and rubber with a razor, taking care not to damage the paint or door flange.
- Clean the sealing surface thoroughly with isopropyl alcohol or adhesive cleaner and allow it to dry.
- Test-fit the new seal (left or right as applicable) along the door edge to confirm correct orientation and length.
- If adhesive is recommended, apply a thin bead of weatherstrip adhesive to the door flange in short sections; avoid continuous application to prevent squeeze-out.
- Press the new weatherstrip firmly into place, aligning any factory holes or clip positions. Use masking tape to hold the seal in position while adhesive cures if needed.
- Trim any excess material with a razor for a neat fit and inspect the seal along the full door perimeter for continuous contact.
- Allow adhesive to cure per product instructions (if used). Re-check door operation and adjust as needed to ensure proper closure and sealing.
About Precision Replacement Parts
Since 1986 Precision Replacement Parts has been a trusted name in the Automotive Glass Industry.
Our knowledge and experience in manufacturing millions of extruded and molded EPDM Rubber, PVC and HDPE based plastics, and various stamped and extruded metal products for the classic and late model industries has allowed Precision to expand our services into multiple product markets.
Along with our own USA based production facility, Precision also partners with 25 different manufactures worldwide with a reputation as a global leader supplying OEM and replacement products to a number of different industries. Our partnerships along with our own in-house manufacturing and fabrication capability gives Precision a unique position in helping to meet the expanding needs of customers everywhere, providing them with a sustained competitive advantage.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Cadillac |
Escalade ESV |
2007 - 2014 |
| Cadillac |
Escalade EXT |
2007 - 2013 |
| Cadillac |
Escalade |
2007 - 2014 |
| Chevrolet |
Avalanche |
2007 - 2013 |
| Chevrolet |
Silverado 1500 |
2007 - 2013 |
| Chevrolet |
Silverado 2500 HD |
2007 - 2013 |
| Chevrolet |
Silverado 2500 |
2007 - 2013 |
| Chevrolet |
Silverado 3500 HD |
2007 - 2013 |
| Chevrolet |
Silverado 3500 |
2007 - 2010 |
| Chevrolet |
Suburban 1500 |
2007 - 2014 |
| Chevrolet |
Suburban 2500 |
2007 - 2013 |
| Chevrolet |
Tahoe |
2007 - 2014 |
| GMC |
Sierra 1500 |
2007 - 2013 |
| GMC |
Sierra 2500 HD |
2007 - 2013 |
| GMC |
Sierra 3500 HD |
2007 - 2013 |
| GMC |
Yukon XL 1500 |
2007 - 2014 |
| GMC |
Yukon XL 2500 |
2007 - 2013 |
| GMC |
Yukon |
2007 - 2014 |
