Your shopping cart is empty!
DRIVEN BY CARE
-
My Account Sign In / Register
×
Select Your Vehicle to Shop for the Correct Parts:
Show More Filters
Since 1982, we have been producing exceptional quality restoration parts for the industry. Fast forward to today, and our manufactured line now numbers in the thousands. The demand for precise quality reproductions continues to grow, and the RESTOPARTS® brand proudly answers that demand with an ever expanding line of the finest quality restoration parts available today.
1-36 of 3302 results for RestoParts : All Productsgo
Sort by
Show
Show results for
Refine By
Availability
On Sale
Condition
Price
Under $10 (81)$10 to $25 (234)$25 to $50 (556)$50 to $100 (398)$100 to $250 (827)$250 to $500 (531)$500 & Above (675)
$ to $ go
Manufacturer
Show Less Filters
Model: 3022495
Condition: NEW
These convenient kits include upper and lower support bushings and are shipped complete with the original steel mounting washer and bolt hardware kits, if so desired.
Radiator Support Bushings Reproduction-Style…
Model: 3435690
Condition: NEW
When replacing your headliner, don't take a chance with old, brittle clips. OPGI has just what you need to keep your headliner bows in place. Two different styles are available depending on your application needs. The large clips are for…
Model: 3435499
Condition: NEW
Complete assemblies manufactured in die-cut original material.Heater Box Seals Without Air Conditioning.Factory replacement…
Model: 3434050
Condition: NEW
This pad runs the length of the firewall in the interior and behind the dash. This will help eliminate much of the engine noise caused by dried-out existing insulation. The pad features heavy-duty jute insulation with a stamped rubber…
Model: 3435848
Condition: NEW
Factory-correct replacement. Your satisfaction is guaranteed.
Interior Dome Lens Sedan Center.
Our replacements even include the factory color-keyed lenses in original "eggshell", off-white or white where applicable!
Part#…
Model: 1007337
Condition: NEW
This molded plastic grommet is an identical reproduction of original equipment and is designed to keep the accelerator cable from pulling through the pedal linkage. Sold per each, the grommet snaps into the accelerator pedal linkage and is…
Model: 3123549
Condition: NEW
Includes the nut and bolt.
Front & Rear Control Arm Bolts Upper, Serrated (4 Bolts/4 Nuts).
…
Model: 3435335
Condition: NEW
This reproduction license plate lamp assembly is identical to original equipment installed on 1965-72 GTO, Tempest and LeMans models. Each assembly features a stamped-steel housing that is plated in the correct gold-cadmium for an…
Model: 3028204
Condition: NEW
When replacing your headliner, don't take a chance with old, brittle clips. OPGI has just what you need to keep your headliner bows in place. Two different styles are available depending on your application needs. The large clips are for…
Model: 3434105
Condition: NEW
A complete assembly. This high-quality, chrome-plated reproduction includes spring and baseplate.
Strato Bucket Seatback Lock Button.
Convenient to order and easy-to-install! In stock for immediate delivery
…
Model: 3104708
Condition: NEW
This kit includes all of the necessary hardware to install all components of the consoles, including top plate, rear lamp, console door, lock latch, etc.Console Screw Kit.This is a "must-order" when purchasing a complete console kit or…
Model: 3435976
Condition: NEW
The very best reproduction on the market! Guaranteed to have the best quality, fit and finish at an outstanding price. These kits feature all our professionally manufactured and quality controlled components: case-hardened steel, die-cast…
Model: 3434166
Condition: NEW
ALL KITS INCLUDE ? Base, lens and wire leads. S230226 includes base, lens, bulb and socket.
Dome Light Kits Center.
Everything necessary in one package
Part# DLK004 and S240609 requires two per car.
…
Model: 3043840
Condition: NEW
Tailgate & Rear Bed Panel Screw & Fastener Kit.…
Model: 3434046
Condition: NEW
Our premium-quality wire routing gutter is ideal for a clean appearance along your firewall. The gutter is manufactured from heavy-duty extruded plastic and built to withstand the heat of your engine compartment.Firewall Wire Routing…
Model: 3435938
Condition: NEW
Windshield Washer Jar.Bottles and capsBottles do not include caps.…
Model: 3434164
Condition: NEW
These kits come complete with base, lens and wire leads (unless specified).Dome Light Kits Wagon/Sedan (Standard).Everything necessary in one packagePart# DLK004 and S240609 requires two per car.…
Model: 3123180
Condition: NEW
These retainers are used behind the headlights to space the bottom of the headlight bezels out. They are mounted to the lower valance panel under the headlights.
Headlight Bezel Retainers.
Spaces out bezels
…
Model: 3434705
Condition: NEW
These fine-tooled and stamped panels are produced in original factory-grade sheet metal. The full quarters cover the door jamb and trunk channel and flange up to the bottom of the sail panel by about a half-inch. The 86" x 25" panels run…
Model: 3436012
Condition: NEW
These complete kits include exact reproductions of the original rubber bumpers found on the doors, trunk lid, hood, side of hood, gas tank door and interior glove box. Does not include tailgate bumpers.Rubber Stopper Kits.Replace your…
Model: 3435359
Condition: NEW
Brilliant steel edge molding is an extension of the rear hood edge molding located on the upper edge of the fender.
Top Edge Of Fender Moldings Top Edge Of Fender.
…
Model: 3046691
Condition: NEW
Converts stock control arms to a boxed-style.
Converts stock lower rear control arms to a boxed-style (like the originals with a factory rear sway bar). Includes two mild steel inserts that need to be welded into stock, non-boxed rear…
Model: 3435516
Condition: NEW
These are the small aluminum moldings that go between the headlights. Two required per car.In Between Headlight Moldings.Exact extruded and formed aluminum reproduction that's identical to factory GM originals…
Model: 3434160
Condition: NEW
Brighten up your interior by replacing your existing faded dome light base with the bright reflective light of a new one.Dome Light Chrome Base.For all 6477 Chevelles and El Caminos…
Model: 3097208
Condition: NEW
These grommets fit into pre-existing 1-1/4" to 2-1/4" holes in the firewall and keep the accessory wires where they belong. Reproduced to original specs, the grommets are used for routing heater and AC wires, power window wiring or any…
Model: 3434243
Condition: NEW
Die-stamped rubber A-arm seals fasten to the inner fenderwells and prevent dirt and debris from entering the engine compartment. These rubber seals are designed to replicate factory fit and function and install in the original location…
Model: 3028665
Condition: NEW
These end caps are exact reproductions of the now obsolete GM versions. It works perfectly with our headliner seal strips for Chevelles except CHV4823, which also fits 1964-67 El Camino.Rear Window Trim Caps 2-Door Coupe Middle.These…
Model: 3435966
Condition: NEW
Correct compression molded rubber bumpers!
Control Arm Bumpers Upper.
Save over 10% on the kit
…
Model: 3435698
Condition: NEW
Parking brake release handles are reproduced to factory specifications in your choice of black or chrome-plated finish. Each injection-molded handle features the original lettering and pushes into place on the release handle. A must-have…
Model: 3435539
Condition: NEW
Includes the nut and bolt.Rear Lower Control Arm Bolt Lower, 1 Bolt/1 Nut.Correct Gra8 bolts…
Model: 3435255
Condition: NEW
Having the correct-length seat belt bolts, with the right shoulder, allows the belts to pivot easily and function properly. OPGI offers bolts in three different lengths in either a cad-plated or chrome finish for all 1961-72 models. The…
Model: 3025644
Condition: NEW
Each is a professionally manufactured, hard-tooled, injection-molded plastic lens, along with a carefully reproduced die-cast zinc housing. The complete assembly fits either side and includes the housing, lens and bulb completely…
Model: 3435980
Condition: NEW
These insulators are used between the coil spring and the frame of your vehicle to eliminate the noises created by metal-to-metal contact. Insulators are manufactured to OEM specifications for a precise fit and function. Choose between…
Model: 3435842
Condition: NEW
Both pedal pads are exact reproductions of the original ones. The 1964-67 version (part# PZ00011) has the correct ribbing and pivot ball sockets as well as the throttle rod cutout at the top. The 1968-72 pad is a finely crafted…
Model: 3435508
Condition: NEW
We offer both the original GM handles or the quality tooled die-cast zinc reproductions at a fraction of the cost. Either way, both are guaranteed to satisfy your needs. Precisely manufactured reproductions or authentic factory GM?new…
Model: 3434632
Condition: NEW
Authentically reproduced coat hooks from OPGI are identical to original equipment and are available in chromed steel for 1964-66 vehicles and molded plastic for 1967-72 vehicles.Interior Coat Hooks Black All.Identical to the original…